Slicer Discord
Voice Assistant Case – 3D printable model from MakerWorld MakerWorld
Electronics

Voice Assistant Case

31 Downloads
19 Likes
17 Makes
Go to Model
This is a case for a Raspberry Zero which is equipped with a ReSpeaker2 Hat and a loudspeaker.This device acts as a Home Assistant Voice satellite / Rhasspy satellite.The lid is covered with speaker fabric and has a button that presses the on the ReSpeaker2.Due to the recesses on the back it is possible to connect a USB dongle and an external loudspeaker in addition to the power cable.Simply apply a little glue to the lid and stick the fabric on. Then place the lid on the housing and, if necessary, use a thin screwdriver to push the excess fabric into the gap.The following speakers are provided:Large Hole spacing 63x24mm - Case_LSmall Hole spacing 36mm - Case_SDeutsche Version:Hierbei handelt es sich um ein Gehäuse für einen Raspberry Zero welcher mit einem ReSpeaker2 Hat und einem Lautsprecher ausgestattet ist.Dieses Gerät dient als Home Assistant Voice Satellite / Rhasspy - Satellite.Der Deckel ist mit Lautsprecherstoff bezogen und besitzt einen Knopf welcher den auf dem ReSpeaker2 d
Category
Electronics
Source
MakerWorld
Published
Updated
What you need to print this: Intermediate Low confidence
Single piece
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
PLA
Min. bed size
63 mm (Small)
Post-processing
Gluing
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

4 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection