Volkswagon Golf Hueforge

Project: VolkswagonGolfMk1.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.5mm and the Actual Depth is 2.6mmFilaments Used: PLA jayo black Transmission Distance: 0.1 PLA jayo white Transmission Distance: 7.6 PLA jayo red Transmission Distance: 5.8 PLA BambuLab Basic Yellow Transmission Distance: 6This print uses 4 unique filamentsSwap Instructions: Start with black At layer #8 (0.72mm) swap to white At layer #19 (1.6mm) swap to red At layer #28 (2.32mm) swap to Yellow for the rest.