Thingiverse
Electronics
Go to Model
Voltmeter/Ammeter Case - 1
184
Downloads
135
Likes
0
Makes
Case for a voltmeter/ammeter circuit case, used for measuring the output of a solar panel.
Uses a voltmeter/ammeter circuit and a 5.5mm x 2.1mm jack, both available on ebay.
The circuit is supposed to work without a shunt for less than 10A, but I had to wire across where the shunt would be for it to work, adjusting the length of the wire to roughly calibrate the current meter. Another version without this issue can be found at http://www.thingiverse.com/thing:328366
Some of the parts used for the meter:
* http://www.taydaelectronics.com/hardware/dc-power/dc-power-jack-2-1mm-bulkhead-type-panel-mount.html
* http://www.ebay.com/itm/121284198811?var=420241522717&ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Printed with thermochromic grey/white ABS and clear blue PET+.
Uses a voltmeter/ammeter circuit and a 5.5mm x 2.1mm jack, both available on ebay.
The circuit is supposed to work without a shunt for less than 10A, but I had to wire across where the shunt would be for it to work, adjusting the length of the wire to roughly calibrate the current meter. Another version without this issue can be found at http://www.thingiverse.com/thing:328366
Some of the parts used for the meter:
* http://www.taydaelectronics.com/hardware/dc-power/dc-power-jack-2-1mm-bulkhead-type-panel-mount.html
* http://www.ebay.com/itm/121284198811?var=420241522717&ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Printed with thermochromic grey/white ABS and clear blue PET+.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
