Thingiverse
Voron 2.4 Top Hat mod
by ilyao
6
Downloads
5
Likes
0
Makes
Please find installation instructions - and most up-to-date STL/3MF/Fusion360 350/300/250mm files here https://makerspet.com/blog/voron-2-top-hat-mod/.
Voron 2.4 print volume height comes up short of the advertised 350mm (or 300mm, 250mm) - quite a bit - especially when using the StealthBurner extruder and/or PTFE filament tubing. Here is a "top hat" volume height extension that you can 3D-print and mount on top of your Voron 2.4 (or Voron 2.4r2).
This mod sits between your Voron 2 frame and its top see-through plastic sheet. Specifically, this top hat fits into the existing 2020 aluminum extrusion slots on top of your Voron2 - and reproduces 2020 extrusion slots (in plastic) on its own top, so you can re-affix the see-through plastic sheet.
Word of caution - **when printing at Z height above ~310mm**, keep your **minimum Y at 20mm**. Otherwise Stealthburner can collide with your Voron 2.4 frame.
Voron 2.4 print volume height comes up short of the advertised 350mm (or 300mm, 250mm) - quite a bit - especially when using the StealthBurner extruder and/or PTFE filament tubing. Here is a "top hat" volume height extension that you can 3D-print and mount on top of your Voron 2.4 (or Voron 2.4r2).
This mod sits between your Voron 2 frame and its top see-through plastic sheet. Specifically, this top hat fits into the existing 2020 aluminum extrusion slots on top of your Voron2 - and reproduces 2020 extrusion slots (in plastic) on its own top, so you can re-affix the see-through plastic sheet.
Word of caution - **when printing at Z height above ~310mm**, keep your **minimum Y at 20mm**. Otherwise Stealthburner can collide with your Voron 2.4 frame.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
