Voron 2 - LED Wire Guide

Frame attachable wire guide for LED wires. If you want to install LEDs around the top of your Voron 2's frame, these guide the wires so they won't interfere with the Z belts. Two options are available, one for two wires if only one strip of lights is used, and one for four wires if two different strips of lights are used. Recently added a 5 wire version for RGBW LEDs. Picture is the four wire option since I had both white and UV LEDs on different controls. Simply put one in each corner that requires wire guides.

May be compatible with other printers that use 20x20 frames as well. Attach using standard T connectors, such as hammer heads. Use M3x8mm cap head screws for the two wire option, M3x12mm screws for the four wire, or M3x15mm screws for the 5 wire version.