Thingiverse

Voronoi Vase

by Geanner

11 Downloads

13 Likes

1 Makes

Voronoi vase with varying thickness, height and unit cell distribution.

I printed mine at 205C at 0.2mm layer height in spiralized contour (vase) mode. The lower sections with steeper overhang angles on the lattice came out a bit rough with some holes, so I recommend printing at 75-80% size and maybe 0.1mm layer height in an upright orientation.

More of an aesthetic piece than functional, I did this as an exercise in nTop and wanted to share. It is not water tight.

Source

Thingiverse

What you need to print this: Intermediate Medium confidence

Why?

no supports · large print · 0.20mm layers

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 2/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

200 mm (Large)

Layer height

0.2 mm

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Voronoi Vase?

Any FDM printer should handle Voronoi Vase just fine. It's been printed on machines like Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. A minimum build volume of 200 mm is recommended.

Does Voronoi Vase need supports when printing?

No supports needed for Voronoi Vase — it's designed to print clean off the bed.

What file format is Voronoi Vase available in?

Voronoi Vase is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Voronoi Vase free to download?

Yes, Voronoi Vase is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Voronoi Vase

Similar Models

Add to Collection