Thingiverse
vortex water turbine
von joopjoop
151
Downloads
115
Likes
0
Makes
I made this because i saw a video of the company Turbulent, and i made a scale model of it, its not exactly a copy but my 3d drawing is not 100% yet.
i tried 3 types of turbine blade but the proppelor with the biggest pitch works the best as you can see in the video on youtube.
https://youtu.be/iAyac0NlmPg
iit was quit hard to remove the support between the blades but you have to put as litle support in as posible.
i first cut in with a dremmel disc and removed the last with a small chissel.
the pump is a 6 watt brand micra and the diameterof the pump outlet is 13mm
i used a m3 bold of 30mm long
i tried 3 types of turbine blade but the proppelor with the biggest pitch works the best as you can see in the video on youtube.
https://youtu.be/iAyac0NlmPg
iit was quit hard to remove the support between the blades but you have to put as litle support in as posible.
i first cut in with a dremmel disc and removed the last with a small chissel.
the pump is a 6 watt brand micra and the diameterof the pump outlet is 13mm
i used a m3 bold of 30mm long
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
