VPNVG-4 C/MK2

this is the VPNVG-4C/MK2

what to print.

2 bodies they are the same
2 lense retainers
4 sensor caps
4 locking plates
2 buffers
1 bridge
if printing the rhino bridge you will need the "Hinge"
total build should be under 1kg of filament

parts to build
various metric bolts
4 2" inch adafruit ntsc/pal tft. (this can be subbed for the screens in the "flysight" FPV watches on amazon but modification and soldering on the PCB is necessary and they are not as good.)
4 50mm focal length lenses
some kind of connectors (i used xt-30 connectors)
a 7.5-12v battery pack if its a 7.5v it needs to be at least 3000mah i am using two in parallel.

if you do not have a mount you can print the warthog NVG mount and the dovetail bridge