VR Face Tracker Mount - Project Babble

This is a mount for a face tracker that uses the same hardware as EyeTrackVR. For hardware use a 160° IR camera, ESP32-CAM (I recommend the ESP32S3-CAM), and the firmware for EyeTrackVR. IR LEDs are the same as the ones recommended for EyeTrackVR (https://www.lcsc.com/product-detail/Infrared-IR-LEDs_XINGLIGHT-XL-3216HIRC-850_C965891.html) with a slight change to the wiring.

5V -> ~500ohm resistor -> IR LED -> IR LED -> IR LED -> GND

Intended for use with the Project Babble software. Designed for use with the Valve Index, but should work with any headset as this is glued into place.

EyeTrackVR firmware guide: https://docs.eyetrackvr.dev/firmware_guide/flashing_tool
EyeTrackVR parts list for reference: https://docs.eyetrackvr.dev/how_to_build/parts_list
Project Babble: https://github.com/SummerSigh/ProjectBabble