VW Horn Button 211.415

Horn Button for VW Bus. Part Number 211.415.

I found that the best way to print the flat emblem ("VW Horn Button.stl") is face down on build plate using support for side groove slot.

The other two models ("VW Horn Button Original.stl" and "VW Horn Button Original with logo.stl") printed best with button facing up at 45 degree from build plate using supports and brim

For the retaining clip, I cut a piece of 80/20 bronze wound guitar string (5th A 0.042" diameter) 7-3/4" long. Wrap tightly around a 5/8 to 3/4 diameter bar or tube to create circular profile. The spring-back will make wire just slightly larger than the groove in button. Bend ends approx 1/2" on each end. Insert ends of clip into slot in groove. Assemble by inserting the button into the metal cup starting at the closed end of clip, and work around to the open end of clip. as last part of insertion.

UPDATE: After successfully printing parts with PETG, I decided to try ABS and vapor smooth part. Because