VW MK2 Syncro Adapter Plate

This is a version of the adapter plate. This will allow you to swap the rear beam from other Syncro VW's (Passat, Golf, etc.). This plate is the same offset as the Passat.

v2 is 25mm forward to help center the wheel in the wheel well.

V3 is 19mm forward to adjust centering of the wheel yet again

UPDATE : The first print failed due to inadequate support material for the forward tab. it was otherwise a great print with a very good surface finish and structurally sound with only minor modifications needed to be made to the design. Primarily the placement of one hole is about 5mm off ( Its hard to measure some things when they are odd shapes ).