Slicer Discord
3DSEARCH / Other Props & Cosplays / Wailmer Pail
Wailmer Pail – 3D printable model from MakerWorld MakerWorld
Other Props & Cosplays

Wailmer Pail

by nicksoup · Other Props & Cosplays
74 Downloads
44 Likes
22 Makes
Go to Model
3d printable version of the Wailmer pail from Pokemon Gen III. It is a remix of zprint3d's Wailmer Pail on thingiverse. The original file had the body as one piece, so I split it in half and added supports for the inside of the dome. Each half is about 150 grams of filament and 12 hours to print. I have the eyes in there as well, but I just colored them in with sharpie instead of printing them. I used E3000 to glue the two halves together and add the fins.
Category
Other Props & Cosplays
Source
MakerWorld
Published
Updated
What you need to print this: Beginner Low confidence
Why?
print-in-place design
Print-in-place
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
Est. print time
12 h
Post-processing
Gluing
Software
Cura, PrusaSlicer, or similar
Frequently Asked Questions
Does Wailmer Pail need supports when printing?
Nope — Wailmer Pail is print-in-place, so it comes off the bed ready to use. No supports, no assembly.
How long does it take to print Wailmer Pail?
According to the design notes, Wailmer Pail takes approximately 12 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.
What file format is Wailmer Pail available in?
Wailmer Pail is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.
Is Wailmer Pail free to download?
Yes, Wailmer Pail is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Wailord Lightbox
Wailord Lightbox
by Sitsero
↓ 13 ♥ 9
Wailmer Lightbox
Wailmer Lightbox
by Sitsero
↓ 5 ♥ 7
Mosquito Coil Holder Koffing Pokemon
Mosquito Coil Holder Koffing Pokemon
by Arwel
↓ 40 ♥ 7
Pokemon Poke Ball
Pokemon Poke Ball
by kriswillcode
↓ 4.4k ♥ 1.1k
Pokemon Poke Ball
Pokemon Poke Ball
by Coronado
↓ 1.3k ♥ 278
Pokemon Poke ball keychain
Pokemon Poke ball keychain
by nicodeimos
↓ 734 ♥ 278
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
· Impressum · Privacy
DE EN FR ES IT NL

Add to Collection