Wall mounted jar holder

Holders designed for 95 mm diameter jars. Mounted with double sided tape. The jars can be lifted out of the holders or pulled straight out. Keeps the jars still with no rattling when mounted on inside of cabinet door. I used these to mount glass jars to the inside of my kitchen cabinet doors for better visibility and accessibility. Could be used for any round container. Use the scale function to adjust if your containers have a slightly different diameter. These however are not designed for heavy containers. For this I would probably make them slightly thicker. This could be adjusted with the “X-Y contour compensation” setting. For heavy containers i would also recommend screw mounting rather then tape mounting. I used ABS-GF filament. Less stiff materials might need thicker walls (X-Y contour compensation) PLA is probably not so good because of its tendency to creep under load. Also included a template guide to help mount them straight.