Slicer Discord
Wall Mounted Self Watering Planter – 3D-Druckmodell von Thingiverse Thingiverse

Wall Mounted Self Watering Planter

von Karzdan
46 Downloads
30 Likes
0 Makes
Zum Modell
A nice hexagonal planter that attaches to any wall. This version is fairly small, about 1/2 the size of a 12 oz can.

Affix the plate with two screws and slide the reservoir onto it. Fill with about an inch of water, then you can slip the planter into the reservoir. Water will be pulled up through the holes in the planter. A cutout is included a paper note of what you have planted. Colors can be mixed or matched as well, so have fun.
Quelle
Thingiverse
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen