A small plant pot designed to be fixed to a wall with the use of drawing pins only. There are many holes for pins although using a few is easily strong enough to hold it on. It is designed to print without supports and took 8-9 hours on my ender 3. The design is 108 mm wide and 108 mm tall.
What you need to print this:BeginnerMedium confidence
Why?
no supports
Support-freeSingle piece
Supports0/3
Assembly0/3
Settings1/3
Bed size0/3
Post-process0/3
Printer
FDM / FFF
File format
STL
Material
PLA
Est. print time
9 h
Software
Cura, PrusaSlicer, or similar
Frequently Asked Questions
Does Wall Planter (Multiple Sizes) need supports when printing?
No supports needed for Wall Planter (Multiple Sizes) — it's designed to print clean off the bed.
How long does it take to print Wall Planter (Multiple Sizes)?
According to the design notes, Wall Planter (Multiple Sizes) takes approximately 9 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.
What file format is Wall Planter (Multiple Sizes) available in?
Wall Planter (Multiple Sizes) is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.
Is Wall Planter (Multiple Sizes) free to download?
Yes, Wall Planter (Multiple Sizes) is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.
Did you print this model? Sign in and share your make!
Thingiverse
