Thingiverse
Wall Thickness Caliper
door MatissB
1
Downloads
1
Likes
1
Makes
This is a custom wall thickness caliper designed for use with 20x40 V-slot aluminum profiles and a few 3D-printed parts.
It’s especially useful when renovating or inspecting a house, as it makes it easy to measure wall thickness around windowsills, door frames, and other openings where a regular caliper won’t fit.
Jaw width: 120 mm – ideal for getting around obstacles and into narrow spaces.
Adjustable length: Depends on the extrusion you use. With 300 mm profiles, you can measure up to ~100 mm wall thickness.
Tape measure integration: Add a 10 mm self-adhesive tape measure to make readings quick and accurate.
Materials Needed:
*28 × M5 8 mm hex bolts
*28 × M5 T-nuts
*4 × M5 20–30 mm countersunk screws
*2 × 20×40 V-slot profiles (minimum length 300 mm, longer for thicker walls)
*1 × ~10 mm wide self-adhesive tape measure
It’s especially useful when renovating or inspecting a house, as it makes it easy to measure wall thickness around windowsills, door frames, and other openings where a regular caliper won’t fit.
Jaw width: 120 mm – ideal for getting around obstacles and into narrow spaces.
Adjustable length: Depends on the extrusion you use. With 300 mm profiles, you can measure up to ~100 mm wall thickness.
Tape measure integration: Add a 10 mm self-adhesive tape measure to make readings quick and accurate.
Materials Needed:
*28 × M5 8 mm hex bolts
*28 × M5 T-nuts
*4 × M5 20–30 mm countersunk screws
*2 × 20×40 V-slot profiles (minimum length 300 mm, longer for thicker walls)
*1 × ~10 mm wide self-adhesive tape measure
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
