Wallmount for Waveshare Pico e-Paper 5.65

I needed a wallmount for my weatherstation, so here it is.This wallmount fits Waveshare Pico e-Paper 5.65 with the Raspberry Pi Pico 2 W connected.There is a hole for the micro usb connector, although i wired it directly, so i did not need a visible usb cable. If you are interested in making a similar weatherstation, here is the github link to the project: https://github.com/frederik-andersen/micropython-ePaperWeatherStation Boost MeIf you like the wallmount, a boost would be greatly appreciated.Screw distance:Center-center distance for mounting points is 60mm.Any 4mm woodscrew should fit. Mount the screen in the wallmount:Insert the Top Edge FirstGently push the top of the screen into place.Align the USB ConnectionSlightly bend the sidewall to allow the USB connector to reach its correct position.Secure the Bottom EdgePush the bottom part of the screen into place.Ensure a Firm FitPress all around the back of the screen to ensure it is securely fitted.The screen is hold in place by 3 d