wandkastje Lasercut

Files can be cut on a laser cutter or CNC router.

size of the cabinet is: 50 cm x 40 cm x 15 cm

Material I used is Birch Plywood with a thickness of approx. 5.5 mm

As front glas I used a piece of 2 mm transparent Acrylic, that I cut into two pieces.
You can slide the one of the acrylic behind the other to get access to the cabinet.

I also have included the original fusion file, but the file is a bit messy.

* remember to glue some wood behind the acrylic to be able to slide. I should have incorporated this into the design, but I forgot to do this. In the end I just glued some pieces of wood 5 mm onto the bottom and top plate, so the acrylic gets “trapped” between the front plate and the wooden pieces.