Thingiverse

Wanhao Duplicator 9 D9 Raspberry Pi Camera Bed Mount

by Bleugh

16 Downloads

7 Likes

0 Makes

Printed - The Hollow one is a little too thin, I'll re-do the STL thicker - 8mm instead of the current 4mm. Matches well the measurements on the bed of the D9. This clamps under the bed with 4 x M4 Bolts (4mm holes) and

The Arms and Bracket use M3 x 12's for a real snug fit, M3 x 16 gives plenty of thread left over

I made this originally for the camera enclosure from
https://www.thingiverse.com/thing:2864095

I've included TWO mounting arms - one is 4mm wide both sides, the other has a 3mm width on one side as most camera mounts on thingverse seem to be 3mm...
Message me if you want a different width

bed bracket camera duplicator Duplicator 9 monitoring mount OctoLapse Octoprint Raspberry Pi timelapse Wanhao bed bracket camera duplicator Duplicator 9 monitoring mount OctoLapse Octoprint Raspberry Pi timelapse Wanhao

Source

Thingiverse

What you need to print this: Intermediate Low confidence

Single piece Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format