Wardrobe, Cloth Stand

This is an easy wardrobe out of 4 parts in order to print it in a good size. Just mirror both parts that are uploaded. I printed in PLA, is good enough. You need 4 screws to fix it. the wood sticks have a diameter of 20mm for the upper part and 25 mm for the cloth hanger part. You get them cheap from any shop. The wood is not fixed, just laid into the printed parts. My example has a lenght of 1 meter but you can just cut the wood in the lenght you need.

May26, 2021: Updated the stl files, the connector were uploaded in an old version.