Warhammer 40k Kill Team Point Tracker

There are spaces for magnets, should you desire to use them. The Victory Points and Special dials take 3mm x 2mm magnets, and the Command Points wheel takes 5mm x 2mm magnets. The VP wheel takes 22 magnets (21 for the numbers and one in the tracker bottom), the SP wheel takes 14 (13 for numbers and 1 in the tracker bottom), and the CP wheel takes 14 (13 for numbers and 1 in the tracker bottom).

I painted the top by using the following method:
1) Prime black
2) Spray paint the desired highlight color
3) Two coats of Minwax spray polyacrylic clear coat (let set for a full 24 hours after the final coat)
4) Spray paint black (allow to dry for 24 hours)
5) Using a rag with mineral spirits stretched over my finger, I carefully rubbed off the black paint on the raised areas. The clearcoat protects the color underneath

For the numbers on the wheels, I just rubbed in watered down acrylic paint and wiped the surface clean. The paint stayed in the depressed areas, like a wash.