MakerWorld
Hueforge & Lithophane
Go to Model
Warrior Paladin
40
Downloads
17
Likes
10
Makes
Project: Warrior PaladinPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200.01x184.38mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.9mmFilaments Used: PLA Black Transmission Distance: 0.3 PLA dark grey Transmission Distance: 0.8 PLA oro Transmission Distance: 1.4 PLA White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #9 (0.8mm) swap to grey At layer #12 (1.04mm) swap to oro At layer #15 (1.28mm) swap to White for the rest. Boost MeAgradeceria una ayuda !! Gracias
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
