Water phaser - Summer fun

The design This is a pump style water gun that is gear driven. It will shoot 100-150 ml of Water a distance of 4-5 meters. It features a magasine and you can get multiple shots out before needing to reload. It will give a good soaking and should provide loads of fun. The tolerances are fairly tight. The handle is fitted by means of a dovetail and may need some light tapping at first. The magasine top is fairly rigid at 1st and may need a screwdriver to wedge it open but thereafter if functions quite well. This is a 3d printed water gun that works on pressure. I kept the tolerances to a minimum but there will be some minor leaks but this will not affect function. Also, it is pump gear driven and does not use compressed air or an electric pump so don't expect Nerf like performance. You can also use a very thin coat of vaseline where the magasine clips onto the phaser to remove any gap. I found that tilting the gun forward before firing helps when using the gun gets about half full of water. Also, the nozzle cap is used when filling the gun and will pop off on the 1st shot. Enjoy! Assembly It is easy to assemble and an assembly gif is provided. For the gear handle assembly look at the gif video which illustrates how to position the parts when adding the gear handle. My designs I enjoy creating 3d models that others can use and appreciate. It is a very fun pastime. I find it very rewarding to see my models downloaded and printed. I put lots of thought, time and effort to create each model print out multiple iterations to make sure it works just right. If you liked my model and wish to encourage me please give it a like or a boost. If you wish you can also help me with my filament costs. Thank you.