Thingiverse
Water Squirting Nozzles
4
Téléchargements
4
Likes
0
Makes
Various nozzles and mounting hardware for squirting water. I designed this system for use on an FRC robot, but it's wonderfully versatile and can be used anywhere you want. Good for about 25 feet with a ~0.5GPM (2lpm) pump.
Includes nozzles ranging from 1.5mm to 4mm, several mounting plates, and a servo-mounted turret for motorized aiming.
This system works with standard aquarium tubing (3/16"), or anything flexible and slightly smaller than 6mm (~1/4") ID. 1/4" tube is a bit loose and leaks water. Tubing should be press-fit, and if your printer's layer adhesion is pretty good you can pull the tubing off afterward without hurting the nozzle.
A good pump to use is RobotGeek's Large Liquid Pump (https://www.robotgeek.com/large-liquid-pump), which is 0.5gpm and will shoot around 25 feet with the 2mm nozzle, and can really drench someone with the 3mm nozzle.
Nozzles can be attached to a through-hole from the front using the mounts, or from the back using hose clamps. Use the la
Includes nozzles ranging from 1.5mm to 4mm, several mounting plates, and a servo-mounted turret for motorized aiming.
This system works with standard aquarium tubing (3/16"), or anything flexible and slightly smaller than 6mm (~1/4") ID. 1/4" tube is a bit loose and leaks water. Tubing should be press-fit, and if your printer's layer adhesion is pretty good you can pull the tubing off afterward without hurting the nozzle.
A good pump to use is RobotGeek's Large Liquid Pump (https://www.robotgeek.com/large-liquid-pump), which is 0.5gpm and will shoot around 25 feet with the 2mm nozzle, and can really drench someone with the 3mm nozzle.
Nozzles can be attached to a through-hole from the front using the mounts, or from the back using hose clamps. Use the la
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
