Water tap

Several plastic parts and a pair of seals are needed for the construction. You can see how the valve works in the [video](https://youtube.com/shorts/uJEVpxr-tRU). The valve is primarily designed for plastic canisters 10l,15l.... Lid for canister is currently not modeled, and is necessary drill 25mm hole to original canister lid.

Plastic parts:
- main
- valve
- nut
- screw
- air (optional I have better result without this part)

Seal parts:
- 3x Silicone O-Ring 22x18x2mm for example [this](https://www.aquateam.sk/eshop/sada-o-kruzok-22x18-5ks/p-410578.xhtml) or [this](https://www.ebay.com/itm/313618601693)
- 1x flat seal 1" or 25x38x3mm for example [this](https://www.genszky.sk/tesnenia/492-tesnenie-priemer-25x38x3.html)

Printer settings:
PLA filament
0.4 mm Noozle
0.2 mm quality
Support required only for main