Waterfall

Segnalibro\segnaposto con una fata dell'acqua. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 76.46x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Jessie Premium Pure Cyan Transmission Distance: 4 PLA BambuLab Matte Lemon Yellow Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #10 (0.88mm) swap to Pure Cyan At layer #16 (1.36mm) swap to Lemon Yellow At layer #19 (1.6mm) swap to Jade White for the rest.