Thingiverse
Watering Can
door BoCoKeith
16
Downloads
10
Likes
0
Makes
A simple watering can with lots of parameters to control size and shape. The default parameters are sized to print well on a Prusa MK3 thrinter.
The can is printed in two parts -- a body+spout and a handle -- that need to be glued together. (You might be able to print it as one part with appropriate supports; good luck.) I used a two-part epoxy and clamped glue points; seems very sturdy.
For the watering in the cover photo, I used my slicer (PrusaSlicer) to insert filament changes for a four-color body then used a fifth color for the handle. It made a fun toy for my grandson.
The can is printed in two parts -- a body+spout and a handle -- that need to be glued together. (You might be able to print it as one part with appropriate supports; good luck.) I used a two-part epoxy and clamped glue points; seems very sturdy.
For the watering in the cover photo, I used my slicer (PrusaSlicer) to insert filament changes for a four-color body then used a fifth color for the handle. It made a fun toy for my grandson.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!