Thingiverse
Watering Can
por eizam
0
Descargas
1
Likes
0
Makes
This is a compact minimalist watering can designed to visually match a modern self-watering planter.
The watering can has a rounded rectangular body, wide top filling opening, short upward-angled spout, and a thick rounded handle for comfortable use. It is designed to be functional, easy to print, and suitable for small indoor plants, desk planters, herbs, and decorative plant setups.
Print Recommendations
Material: PLA, PETG, or similar
PETG recommended if you want better water resistance
Wall thickness: at least 2 mm
Infill: 15% or higher
Layer height: 0.16–0.24 mm
No supports should be required depending on your printer and orientation
For best water resistance, use enough perimeters and consider sealing the inside with a food-safe or waterproof coating
The watering can has a rounded rectangular body, wide top filling opening, short upward-angled spout, and a thick rounded handle for comfortable use. It is designed to be functional, easy to print, and suitable for small indoor plants, desk planters, herbs, and decorative plant setups.
Print Recommendations
Material: PLA, PETG, or similar
PETG recommended if you want better water resistance
Wall thickness: at least 2 mm
Infill: 15% or higher
Layer height: 0.16–0.24 mm
No supports should be required depending on your printer and orientation
For best water resistance, use enough perimeters and consider sealing the inside with a food-safe or waterproof coating
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
