watermelon magnet

A simple and useful watermelon magnet! This magnet uses two 10x2mm magnets, which I bought on amazon (any should work). I used CA glue to add the magnets, other types should work but make sure it does before you try it. https://a.co/d/4H4GuQ3 (magnets)https://a.co/d/iCnz7d3 (glue) There are 3 insert types, standard, loose, and very loose. The one that works for you will depend on your printer's tuning and settings. Assembly: I assembled my magnets on top of each other, so that the magnets will automatically go in the correct way. If it's your first magnet, it doesn't really matter which way it goes in. Try assembling the magnet without glue first, to make sure that your tolerances are good and you have the correct insert size. Add glue to the bottom of the magnet hole (you don't need much, it will get spread out when you put something on top of it) Add your first magnet (if you are doing it on top of another magnet it will automatically go in correctly) Add another bit