Waterrower VR3 Pulley

Hello,

This is a replacement part for a WATERROWER VR3
It's the top most pulley indicated in red on the printscreen.

I printed this in PLA
10 walls
5 top/bottom layers
50% infill heaxgon

I had to do some post process with sandpaper to have it all smooth.
Pressed in the bearings with a benchvice and some wooden blocks, 1 at a time.

You don't need to dismantle the rower if you put a philipsbit in a 7mm socket for the ratchet (see last printscreen)