Thingiverse
Waveshare 2.7inch e-Paper HAT stand
by RthingX
32
Downloads
24
Likes
2
Makes
Two simple stands that hold the Waveshare 2.7" e-paper hat and a Raspberry Pi Zero W in a slight angle. After printing, the stands slide on the PCB of the Waveshare hat with a friction fit. Scale the print if the fit is too tight/loose.
Printed in Prusament PLA Galaxy Black and PETG Jet Black.
No support needed, 15% infill. Stands slide on without additional fasteners.
Product page: https://www.waveshare.com/2.7inch-e-paper-hat-b.htm
264x176, 2.7inch E-Ink display HAT for Raspberry Pi, three-color
Project shown on the pictures is the ProtoStax ISS Tracker:
https://github.com/protostax/ProtoStax_ISS_Tracker
Printed in Prusament PLA Galaxy Black and PETG Jet Black.
No support needed, 15% infill. Stands slide on without additional fasteners.
Product page: https://www.waveshare.com/2.7inch-e-paper-hat-b.htm
264x176, 2.7inch E-Ink display HAT for Raspberry Pi, three-color
Project shown on the pictures is the ProtoStax ISS Tracker:
https://github.com/protostax/ProtoStax_ISS_Tracker
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
