Waveshare 3.5" Pi Pico TFT touch streamdeck

This is a simple case for a Waveshare 3.5" SPI TFT touch display for a Raspberry Pi Pico.
The display stands upright in a 45° angle. I designed the case for a little project I found online where a Pi Pico is used as a kind of streamdeck with a touch display.

The electronic parts and a description can be found at https://www.az-delivery.de/products/raspberry-pi-pico-tft-touch-shield-display-projekt?_pos=1&_psq=Stream&_ss=e&_v=1.0

I do not get any benefits if you follow the link to that site...

The Pi Pico serves as a HID and can be used with any computer with a USB-Port. You have to configure the actions resp. the macros of the six icons in the code which is not that difficult. You can use the Arduino IDE to change the code.

Note that this is a rather simple case that I made to meet my needs.

The three parts are designed to fit the Waveshare board with a Pi Pico. The frame that goes over the display must not be glued to the case because otherwise you would not be able