Waveshare 8DP-CAPLCD Enclosure

This is an enclosure I designed for the Waveshare 8DP-CAPLCD touchscreen for the Raspberry Pi 4. If you want to replicate this project, in addition to printing this model you will also need a Raspberry Pi 4, the Waveshare 8DP-CAPLCD, 4 M2.5x5 screws, 2 30mm fans, 2 male to female breadboard jumper wires, a 180 degree USB C male to female adapter, a heastink for the pi is recommended, and a nail or picture hook to hang the display. You'll also need a power supply that can power both the screen and the pi, I recommend the official one. Any other hardware I didn't mention comes with the screen. Tools needed:Your 3D printerPhilips PH1 screwdriver (For the screws that come with the screen)Hex 1.5 driver (For the M2.5x5 screws. If you don't like hex screws you can find similar screws on amazon or mcmaster carr. Just make sure they are counter sunk screws so that the case can lay flat on the wall)Drill (Optional, if you plan on running your power cable on top of your wall you will