Waveshare Raspberry Pi Camera Mount for 2020 Extrusion

**Waveshare Raspberry Pi Camera Mount for 2020 Extrusion**

A camera mount with 2020 extrusion attachment via mast. The mount and camera case are completely *clip-fit* with no screws or fastenings required.

The camera front and back components allow the camera to either be in *portrait* or *landscape* modes.

Recommend printing the **cam_mast_XXXmm.stl** and **cam_front.stl** with the print settings below.

The **cam_back.stl** model however, should be printed with supports and also with a higher infill (possibly 100%) in order to ensure that the clip is as strong as possible.

The height of the **cam_mast_XXXmm.stl** is from the centre of the bolt hole at the base to the centre of the mount cone at the top.

**Future Work**

I will be adding different attachment types in addition to supporting the official Raspberry Pi Camera (both v1 and v2) by adding other camera case options.