Thingiverse
Weather v2
por Kopernikus82
1
Descargas
1
Likes
0
Makes
First:
This is only the housing, you can find the whole project at:
https://nothnagel.org/wetterstation/
You can print this housing and need only some threatet rods M4, some Nuts and the electronics and one pipe with a diameter of 20mm. The complete housing for the electroncs is in the stl files.
Which things can this weather station do:
- Temperature
- Humidity
- Particular Matter
- Ozone
- Barometic pressure
- Ground temperature (via. DS18B20)
- Heat-Index (calculatet)
- Dew Point (calculatet)
I printed this with polylite PETG in white, and after solving the first problems, everything works fine (with the printing)
This is only the housing, you can find the whole project at:
https://nothnagel.org/wetterstation/
You can print this housing and need only some threatet rods M4, some Nuts and the electronics and one pipe with a diameter of 20mm. The complete housing for the electroncs is in the stl files.
Which things can this weather station do:
- Temperature
- Humidity
- Particular Matter
- Ozone
- Barometic pressure
- Ground temperature (via. DS18B20)
- Heat-Index (calculatet)
- Dew Point (calculatet)
I printed this with polylite PETG in white, and after solving the first problems, everything works fine (with the printing)
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
