Webcam mount for Ikea Lack case

This is an adjustable webcam mount for a Creative Live! Cam Sync HD which can be rotated and height adjusted. I'm using it for my octoprint installation to supervise the prints.

Print each of the stls in the given orientation. I've used PETG for all of them except the spacing tool, for that I used PLA.
I printed Axles, AxleConnectors, EccentricLock and the CamHolder with a brim to make sure it sticks well to the print bed. This requires some after print clean up to remove rests of the brim.

Then insert the AxleConnectors into both ends of one axle. The connectors are more wide than height. Therefore they will might have to be rotated to be inserted more easy. I added a drop of glue on the connectors to make sure they stick together.

Using soap and water clean the movement of the screw nuts on the mount plates. Remove any dirt and make sure the nuts can be freely screwed onto the plate.

The eccentric lock is mounted with a M3x16 (DIN 7984) screw and a self locking M3 nut (D