Wedge hanging Bracket for cyclone

Hanging bracket you merge into your top during print to adds a hanging wedge mount for the cyclone. Allows for easy removal.

Merge the FEMALE wedge into the sidewall before printing. I hang it from just the lower, but you could cast it into both in case you decide to do both at a later time.

The female has a plate on it so I could insert T-Nuts and screw it in from the other side. There are 4 screw mount holes in the corners to just screw it to something.

Also take a moment to make sure you have the FEMALE wedge properly oriented with the WIDER side towards the BOTTOM of the cyclone (away from the plate during printing).

Note: Be sure to MERGE so the slicer treats them as one part (indicating your overlap is sufficient).

The wedges do not lock, but they do provide a secure resting connection to hang the cyclone... I guess a lock could be added to the top.

Mine are all printed in PETG with a .6 nozzle.

## Also included:
+ blaster output side... I used a 1.5" pool hose.
+