Wemos D1 mini sliding case.

Wemos D1 mini sliding case

### Introduction

This is a general purpose case for **ESP8266 Wemos D1 mini** board.

It comes in two parts and it is ideal to use it to create embedded device in any larger case.
It is designed in a way the can be fitted on the wall of any 3d creation (if you need to create a larger box which should contain a Wemos board.

The back cover should be screwed with four (_OK, maybe I have been over engineered this. Two screws are enough to hold the cover_) M3 (ideally M3x10mm) and keeps the board firmly close to the USB port in order o be able to plug and unplug the micro USB cable whenever is needed to access the device port for programming or diagnostic purposes.

_Remixing this case is highly recommender to add this case to your own box as a part of a larger 3d case._

### Printing
Both parts should be printed as provided with PLA or PLA+ filament.
Supports are suggested on the back cover

### Electronics and connections
A Wemos D1 min