Thingiverse
Wemos D1 OLED Combo case
by Spiritdude
49
Downloads
27
Likes
0
Makes
Wemos D1 OLED Combo (layered) case, with reset button.
Nozzle: 0.4mm
Layer height: 0.2mm
Note: your printer must be well calibrated X/Y and extrusion flow - if the cover won't fit, file the cover guides and sides as bit, or reduce extrusion flow to 90% (given X/Y is well calibrated).
Also, when you print a button, best print 3 or 4 pieces together, it makes the print easier.
Electrical wiring described at https://spiritdude.wordpress.com/2018/02/16/wemos-d1-mini-with-i2c-ssd1306-oled-128x64/
Nozzle: 0.4mm
Layer height: 0.2mm
Note: your printer must be well calibrated X/Y and extrusion flow - if the cover won't fit, file the cover guides and sides as bit, or reduce extrusion flow to 90% (given X/Y is well calibrated).
Also, when you print a button, best print 3 or 4 pieces together, it makes the print easier.
Electrical wiring described at https://spiritdude.wordpress.com/2018/02/16/wemos-d1-mini-with-i2c-ssd1306-oled-128x64/
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
