Wemos / Lolin D1 Mini + DHT22 sensor case

*It has come to my attention that the tolerance/variance on the width of the Wemos boards can actually cause an issue with the friction fit. My first batch were all ~25.55mm wide, which fits nicely in the 25.60mm space of this Thing. However a more recent batch of boards I've received are all ~25.85mm wide, so will require enlarging the Thing. If you have digital calipers I recommend checking your boards before printing!*

I modified the design slightly for the newer version of the D1 Mini (v3.0.0) that I have. Moved the hole for the reset button to the other side, moved the USB cut out slightly, loosened the tolerance on the Wemos board & tightened the tolerance on the sensor (with matching alterations to the lid).

If you print the lid in a translucent material you can see the built-in LED through it.

You may need to play around with scale to get the fit/tolerances perfect with your printer. I settled with 100.5% scale for the lid to get the fit that I wanted.

I put the Wem