Whale Ho

The style is based on the Japanese woodblock prints of the late 1800s. I used a 4 color AMS but it can be done without. Stops must be placed in the sliced files at the appropriate layers to allow for filament changes.


Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Gray Transmission Distance: 2
PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Blue or Cyan
At layer #16 (1.36mm) swap to Gray
At layer #22 (1.84mm) swap to White for the rest.