Whale Tumbler

介绍：这是一个鲸鱼不倒翁，不需多色打印，不需支撑。Introduction:It's a whale tumbler that doesn't need multi-color printing, no support.打印说明：该模型分为四个零件，这两个零件需要使用80%的 直线填充，颜色为白色，层高0.1mm：Printing instructions: The model is divided into four parts, these two parts need to be filled with 80% straight lines, the color is white, and the layer height is 0.1mm:这两个零件需要使用15%的 网格填充，颜色为蓝色，层高0.1mm：These two parts need to be filled with a 15% grid, blue in color, and 0.1mm in layer height：打印注意事项：模型可能会翘边，打印前请清洁打印板，可以使用胶水增强平台粘性。Printing precautions: The model may have warped edges. Before printing, please clean the printing board and use glue to enhance the platform's adhesion.打印完毕后使用请胶水将零件粘连。After printing, use adhesive to stick the parts together.