Wi-Fi Controllable Turntable

A simple webpage controllable turntable project that I made during a free weekend. The code for this project can be found on GitHub. This turntable should be very cheap to make, I would estimate that it could be less than €4, depending on where the parts are sourced from. I'm open to suggestions/improvements! 😀Make sure to check out my other creations on MakerWorld as well👀 General information:Diameter: 100mmHeight: 33mmWeight: ~60 grams (PLA)Print time: ~2 hours Required parts:ElectronicsULN2003 stepper driver28byj-48 (5V) motorWemos D1 mini (USB-C)3mm LEDLED current limiting resistor (220 ohm) Fasteners3x M3 threaded insert5x M3 bolt2x M3 nut4x M2 bolt4x M2 nut Instructions:Print the required parts.Do a test fit for the component, this also gives you an idea of how long the wiring needs to be.Solder the circuit together (see pictures).Test the circuit by uploading the provided codeMount the components in place. The Wemos and LED probably need a dab of hot glue to stay in place.