Wild Kratts Creature Power Discs Case

This case securely holds 25 Wild Kratts Creature Power Discs. The slots are angled up and sized to have just a little friction to hold things in place. The case closure is secured with 6x2 magnets in the outer corners. Three stacked 6x2 magnets are used in each spot (12 total) so as to provide a bit more attraction. The print pauses at that appropriate layer to insert the magnets. If you change layer height or adaptive printing settings, please ensure that the pause is still at the appropriate spot - on the first layer that covers the magnet holes. You can use the included magnet insertion tool to make sure that the magnets are correctly oriented. Take two 6x2 magnets and separate them while maintaining their orientation to each other. Keeping that orientation, insert one magnet into each end of the tool. Use the “A” side for the top half and the “B” side for the bottom half. Pick up three magnets stacked together using the appropriate end and press them into place during the pause. Wi