Wildcats Light Box

SummaryWildcats lightbox for LED strip lights. The is cut so it can be printed on Ender 3. The lens and the lettering are on the same part, if you want to have the lettering a different color just change filament at layer 5 if at .2 -- PLEASE NOTE -- If you try to print the lettering in PLA the may not stick to the transparent PETG, you will need to glue the letters in place after if you do this. I found out the hard way, I would recommend using PETG for the lens and lettering. The shells are different, one side has a hole for the IR reciever and power cord (they share the same hole).I built this for my son awhile ago and the box does not come apart once the lids are pressed in so I do not have any photos of the build. Holes to connect the halves are 5mm x 20mm from end to end, you do not need inserts if you have a bolt long enough to pass through.I used threaded inserts on one side of the shell and bolted the other side to it.Parts List:4x M3 x 10mm x 5mm threaded inserts ( https://ww