Wind stop

23/07-2023
Update:
Have tested laminate, and it turns out that it is probably best with 80 microns thickness if it sits horizontally. 250 micron thickness is too thick in both horizontal and vertical position, unless you want to deliberately lower the flow.

Have fun!

07/04-2023
Update: Unfortunately, I have to admit that I posted the wrong version. However, there is not much difference.

The new one is a slightly thinner at the bottom and better divided areas. It should hopefully provide a little better air flow through.

If you need to increase / decrease the frame, remember that it is not necessary to change the dimension of the bone in the long direction, only in the short direction, if the frame needs to be made narrower.

I keep both versions, X3 is the new version.

Have fun!

06/04-2023
Update: I mistakenly wrote screw 3 x 16 mm, it should be 3 x 13 mm or smaller.

Have fun!

This is a wind stop for pipe dimensions 150 x 100 mm.

It consists of a stra