Thingiverse
Windmill v4 / Three Propellers
door icimdengelen
9
Downloads
47
Likes
0
Makes
Windmill v4 / Three Propellers
v4 design with three propellers,
propeller diameter 220mm, thickness 7mm
I used a ring that I designed for the Zwo astronomy cameras. I set the inner diameter of the ring to 50 mm.
You can make the bearings more slippery by spraying oil-rust remover on them.
If you mount it on a square profile, mount_V2 may be useful.
If you have problems with the propellers hitting each other, use extender_10mm. In this case, you should use a 55mm bolt.
necessary materials
3x 608zz bearing
1x m4 45mm bolt
2x m4 10 or15mm bolt
for ring
1x m6 15 or 20mm bolt
1x m6 nut
1x m3 10 or 12mm bolt
1x m3 flat washer
https://youtu.be/0r7AwHiK0C4?si=bF4L_DnKzdBJlA7E
v4 design with three propellers,
propeller diameter 220mm, thickness 7mm
I used a ring that I designed for the Zwo astronomy cameras. I set the inner diameter of the ring to 50 mm.
You can make the bearings more slippery by spraying oil-rust remover on them.
If you mount it on a square profile, mount_V2 may be useful.
If you have problems with the propellers hitting each other, use extender_10mm. In this case, you should use a 55mm bolt.
necessary materials
3x 608zz bearing
1x m4 45mm bolt
2x m4 10 or15mm bolt
for ring
1x m6 15 or 20mm bolt
1x m6 nut
1x m3 10 or 12mm bolt
1x m3 flat washer
https://youtu.be/0r7AwHiK0C4?si=bF4L_DnKzdBJlA7E
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
