Window Cat Perch
di tuxcat
81
Download
63
Likes
0
Makes
Window cat perch.
* cleaned up the models to make them print better.
Supplies needed:
Plywood (1/2" thick works well)
Wood Screws (various lengths)
Staple Gun and Staples (1/2" works well)
1: Measure the window and cut a piece of plywood that fits inside it, and is long enough for your cat to sit on comfortably. (leave room for the carpet you will wrap the plywood with)
2: Print two of the brackets and one stop.
3: Place the plywood in the window and mark where the stop should go. It should be just inside the edge of the sill. (leave room for the carpet you will wrap the plywood with)
4: Attach the stop to the plywood with some wood screws.
5: Place the perch back inside the window. Use a level and mark where the brackets should go to keep the perch level.
6: Attach the brackets to the plywood with some wood screws.
7: Wrap the perch in your carpet of choice and attach with a staple gun.
8: Install your new cat perch
* cleaned up the models to make them print better.
Supplies needed:
Plywood (1/2" thick works well)
Wood Screws (various lengths)
Staple Gun and Staples (1/2" works well)
1: Measure the window and cut a piece of plywood that fits inside it, and is long enough for your cat to sit on comfortably. (leave room for the carpet you will wrap the plywood with)
2: Print two of the brackets and one stop.
3: Place the plywood in the window and mark where the stop should go. It should be just inside the edge of the sill. (leave room for the carpet you will wrap the plywood with)
4: Attach the stop to the plywood with some wood screws.
5: Place the perch back inside the window. Use a level and mark where the brackets should go to keep the perch level.
6: Attach the brackets to the plywood with some wood screws.
7: Wrap the perch in your carpet of choice and attach with a staple gun.
8: Install your new cat perch
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!