Windsock bracket 18 inch

This is a pole mounted ring for an 18 inch windsock. It prints on 4 plates. Not compatible with the A1 Mini. Supports are needed. They are defined in the 3mf file. ** V2 main support. I added a new stl for the main support that has additional strength. It is more complicated to get the nut on the main screw with this model but its worth if for the additional support. Because this is designed to be outdoors, I'd recommend using ASA. The pole mounted swivel contains a bearing that allows the windsock to rotate easily. Parts:1x Pole swivel4x 6mm x40mm Bolts and nuts for the Outer ring (in stainless steel and washers are recommended)1x 5mm x 90mm bolt and nut for the mains support from the bracket to the swivel mount1x 6mm x 45mm for the cross brace between the two side sections and the main support.1x 6mm x 20 screw for the top cross brace to the main support.Amazon affiliate linksFor the flag pole swivel:https://amzn.to/4j1c8g4 The 6mm bolts used for the outer ring can be found here: