Thingiverse
Wing Chair
di Winslow
698
Download
589
Likes
2
Makes
The assembled model is 4cm. wide x 3.5cm. deep x 5.5cm. high, - or scale 1:25.
The legs are printed separately and slip into slots under the seat. They can be fixed permanently in position with a drop of Superglue. Note that the front legs are identical, so you will need to print two copies of these.
The model in the photos was printed on my Makerbot Replicator+ at the default setting of 10% infill and a layer height of 0.2mm. I used a raft, but no supports are needed when the parts are printed in the same orientation as the STL files shown here.
See more of my designs at https://www.thingiverse.com/Winslow/designs
The legs are printed separately and slip into slots under the seat. They can be fixed permanently in position with a drop of Superglue. Note that the front legs are identical, so you will need to print two copies of these.
The model in the photos was printed on my Makerbot Replicator+ at the default setting of 10% infill and a layer height of 0.2mm. I used a raft, but no supports are needed when the parts are printed in the same orientation as the STL files shown here.
See more of my designs at https://www.thingiverse.com/Winslow/designs
Winslow pubblica anche su
14 modelli aggiuntivi su altre 2 piattaforme
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!